JLR Approved device:
Replacement for JLR SDD
Covers CAN, & ISO9141 vehicle networks
Most cost effective Land Rover pass-thru VCI device
Best suited for current and future vehicles 
12ft USB cable as standard included
Easy to update for J2534 new functionality Updates

JLR Functions:
1. The 2 for Land Rover connects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a USB cable for use with SDD.
2. Once the J2534 DLL files are loaded, this product will allow normal operation with the JLR SDD diagnostic tool.  
3. The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications. 
4. Only SCP communications are not possible with this device.

JLR ii Vehicles Coverage:

1.What does the for Land Rover do?
The for Land Roverconnects directly to the vehicle OBDII (diagnostic) connector and then to a laptop via a
USB cable for use with SDD.  Once the J2534 DLL filesare loaded, this product will allow normal operation with the
JLR SDD diagnostic tool.  
The device is designed as a replacement pass-through vehicle communications device that can be used for the majority of the JLR SDD diagnostic applications.  
Only SCP communications are not possible with this device.

2.How does it for Land Rover operate in J2534 mode?
The for Land Rover device is simple and easy to use.
l Download the latest J2534 DLL software files from the Diagnostic Associates web site www.diagnostic-associates.com/download.htm and install these on the SDD laptop.
l Connect the J2534 device to the vehicle OBDII connector (the device powers from the vehicle).
l Connect the 12ft USB cable to the J2534 device and the other end to the SDD laptop.
l The red vehicle power (PWR) LED will illuminate to show that the device is powered.
l During communication with the vehicle the status (STS) LED will flash green.
l The device interacts with the SDD diagnostic tool in the same way as the existing.

for Land Rover
Overview
u JLR Approved device
u Replacement for JLR SDD
u Covers CAN, & ISO9141 vehicle networks
u Most cost effective for Land Rover pass-thru

VCI device
u Best suited for current and future vehicles 
u 12ft USB cable as standard included
u Easy to update for J2534 new functionality

For Jaguar &For Land Rover Vehicle Coverage
JLR Vehicles
Supported?
Defender
Yes
Discovery /LR3/LR4
Yes
For Range Rover Sport & for New Range Rover Sport
Yes
For Range Rover
Yes*
For New Range Rover
Yes
Freelander /LR2
Yes
Evoque
Yes
XJ – X300/X308
No
XJ - X350
No
XJ - X351
Yes
XJS
No
XK – X100
No
XK - X150
Yes
XF
Yes
S-Type
No
X-Type
No
F-Type
Yes
(Yes) – Vehicle line fully supported: 
(Yes*) - Vehicle line fully supported apart from viewing Data logger signals from both ECM and TCM
modules simultaneously on 2006MY variants : 
(No) - Vehicle Line Not supported

1pc x JLR Main Unit

1pc x OBD2 Cable

1pc x USB Cable

2pcs x CD

1pc x Carrying Case